SINGLE INKLET NOZZLE CLEANING SOFTWARE INSTALL
SINGLE INKLET NOZZLE CLEANING SOFTWARE SKIN

After cleaning, if the clogging is more serious, maybe it's because the cleaning liquid hasn’t been totally discharged and still stays inside the print head.

SINGLE INKLET NOZZLE CLEANING SOFTWARE INSTALL

Install the ink cartridges and run the 'nozzle cleaning' function twice in printer driver.

Inject the cleaning fluid into the print head that needs cleaning with a syringe, and wait for 10-12 hours,as shown in Figure 3. Print the 'nozzle checking' test page to confirm the color to be cleaned. Ink Express offer no compensation and take no responsibility for any damage you could cause when using this product.Directions: 1. If the head is integrated it should be pumped through the nozzles in the same way as the Epson. Should your print head be removable then bathe in the same way you would a Canon. Leave for 24 hours and dry thoroughly before reinstalling the print head.Īs long as you have access to the print head our “Nozzle Rocket” solution can be used. Place your print head in the container so the solution covers the silver gauze on the inside of the print head. With the print head removed fill a small container with some of our cleaning solution. Take care when pushing the cleaning solution through the printhead as too much pressure can perforate the head.Ĭanon printers will usually allow you to remove your print head. Please Note – some Epson printers have completely integrated print heads that cannot be cleaned in this way. We have sold this cleaning fluid for many years and use it ourselves to repair printers locally. The cleaning solution can work in as little time as 30 minutes, but best results are achieved when it is left to soak for 24 hours, the cleaning process can be repeated for very severe blockages. This is achieved using the supplied syringe and rubber adaptor. To use in Epson models Ink Express recommend pushing the cleaning solution directly through the print head. Our “Nozzle Rocket” cleaning solution is supplied with a detailed instruction guide for ease of use.

This can also be used to unblock printers that have been using dye sublimation inks which commonly block the printing head jets.ĭue to its neutral PH balance our cleaning solution can be used on all models of printers – As long as you can access the print head our solution will clean it.

SINGLE INKLET NOZZLE CLEANING SOFTWARE SKIN

It has been designed to break down the ink to unblock and unclog printing heads whilst ensuring that the printing head is safe at all times harsh chemicals can cause more harm to the printing head than good. The fluid is water based and will not harm the printing head, skin or any surface if it spilled.īy using a high concentrate of ethelyne glycol in its formulation our solution is able to dissolve even the most stubborn dried ink. Suitable for any Aquarius inks including dye and pigment based inks. Our solution is manufactured in Germany by one of the World’s leading ink manufacturers / suppliers. If the ink has dried inside the printing head standard head cleaning facilities found in the printers maintenance area will not cure the blockage and a stronger method is required. The micro-pezio printing heads found in Epson inkjet printers have extremely small nozzles which can block up due to poor quality ink, extreme temperature and most commonly simply lack of use.

Supplied bottled in 100ml volumes the kit includes a 10ml syringe and rubber syringe adaptor for applying the fluid as well as fully annotated and photographed instructions for use. Ink Express “Nozzle Rocket” cleaning solution is the best way to remove blockages from your printer. Pack contains 100ml Bottle, Syringe with Nozzle Adaptor and Instructions 100ml Ink Express ‘Nozzle Rocket’ Printhead Solutionįor use with Epson and Canon desktop printers (Suitable for Micropezio and Thermal Printhead)

Single inklet nozzle cleaning software